News
0.6 mm ultra-thin and waterproof tact switch
The THU12U from PTR Hartmann is an extremely compact, IP67 waterproof tact switch designed for SMT mounting. It is designed to meet the requirements of modern portable electronics. With a…
Read more
3D embossing and digital printing for the best look and feel
Digital printing and 3D embossing open up new possibilities for the functional and visual finishing of electronics enclosures. With these techniques, Bopla offers a flexible solution for both prototypes and small- to medium-volume…
Read more
PCB transformers: safe, isolated, and versatile
Block offers a comprehensive portfolio of PCB transformers with double or reinforced galvanic isolation between the primary and secondary windings. All models are cUL and VDE certified and designed for use in SELV-…
Read more
Infrared power LED with adjustable beam angle for detection and illumination
The Sharlight SLE 35358CPC x3W aq is a 3W high-power infrared LED emitter with a peak wavelength of approximately 850 nm, designed for use in IR lighting and detection applications. The “x” in the…
Read more
Proven RFID performance, now ready for immediate integration
The RFID hardware from the AX’UP Air and AX’UP Dongle is now available as an OEM module. The AX’UP OEM is a compact, slim PCB with RAIN RFID, designed for integration into both…
Read more
250W VNX+ power backbone for mission-critical edge systems
The introduction of the VNX+ standard (VITA 90) creates a compact building block for high-performance edge computing. The architecture is designed for modular, robust systems and is compatible with SOSA,…
Read more
Sleek design, wide field of view: PIR sensor with a flat lens
Panasonic is launching the Flat Wide Detection Type, the first PIR motion sensor featuring a flat lens and the new PaPIRs+ technology. Designed for building automation, professional lighting control, and smart home applications, this sensor combines…
Read more
Rugged Quarter-Brick DC/DC converters
P-DUKE introduces the QBE75W and QBE100W series, a new generation of high-performance DC/DC converters designed for demanding electronics in industrial, military, and railway applications. Features: With a high efficiency of 92%, there is less power loss,…
Read more
Modular housing with integrated cooling solution
The BoVersa series from BOPLA is a modular enclosure system that combines functionality, thermal design, and industrial design in a single platform. The series has been developed for IoT, embedded, and wireless systems where...
Read more
Medical universal battery charger for professional applications
With the introduction of the Model 4041, Mascot is expanding its medically certified Blueline portfolio with a compact battery charger for professional use. The charger delivers a maximum power of 42 W and...
Read more
46% smaller footprint light pipe, without compromises
Modern PCB designs are becoming increasingly compact, but indicator lighting must remain visible. The SZSF Series from Bivar offers a flexible light-pipe system with a 46% smaller adapter footprint of 6x6mm and 30%...
Read more
Battery solutions for medical applications: safety and reliability
In medical equipment, the battery is a critical system component. Reliability, safety, and predictable behavior over the entire service life are essential, particularly in portable and life-critical applications. Battery solutions must therefore...
Read more
Clear marking for PCB and cable connectors
PTR Hartmann offers three marking techniques for PCB and cable connectors, even on round and angular surfaces. Using inkjet, pad printing, or laser, the marking is tailored to the application and environmental conditions. Coding...
Read more
Relays for 40A peak now also available in PiP reflow
Capacitive loads with high inrush currents are a challenge in modern automation. The new Panasonic ALQ6 power relay tackles this with an inrush current of 40A for 100μs. It is now also...
Read more
240 W open-frame power supply for medical applications
The P-Duke MAH240 is an open-frame AC/DC power supply with 240 W continuous power and a short-term peak power of up to 300 W @10 s, housed in a compact 5″ × 3″ enclosure. Due to its...
Read more
Compact development and testing platforms for VNX+
VNX+ (VITA 90) is the latest VITA standard for embedded high-performance computing in applications where Size, Weight, and Power (SWaP) are strictly limited. The architecture is a compact derivative of OpenVPX...
Read more
Targeted heat distribution at thermal hotspots using vapor chambers
In compact electronics and power electronics, thermal performance is often limited by local hotspots rather than total dissipation capacity. Where an aluminum heat sink alone falls short, ThermSpread from Seifert Electronic offers...
Read more
Reliable power detection for electric mobility
The transition to electric mobility places high demands on vehicle electronics. Accurate current measurements are crucial for safety, efficiency and service life of battery packs and drive systems. Open-loop Hall-effect sensors measure DC, AC and...
Read more
Smart batteries for freezing temperatures
In industrial and medical applications, reliability under extreme conditions can make all the difference. The Tefoo Energy GS4040FL and GS4040IL smart batteries are specially designed to operate even at very low temperatures down to...
Read more
Addressable RGB(W) LEDs for creative lighting applications
With the 5050 RGB and RGBW models, Bivar introduces fully programmable and addressable LEDs with integrated ICs. These neopixels are perfect for smart devices, signage and displays where vivid, op...
Read more
Compact high-performance flat push-in connectors
The AK4091 series from PTR Hartmann has proven to be a reliable and compact PCB connector. This connector is widely used for connecting LED strips, but can of course be used for all...
Read more
Compact dual-circuit switch
With the ASQD, Panasonic expands the ASQx electromechanical switches with a version equipped with two NO contacts with a common combined in one compact housing. This enables three different...
Read more
Inductive components the basis for reliable electronics
Germany-based Block is known to many engineers for transformers and EMC filters, but the company also provides a broad portfolio of PCB components and inductive solutions for industrial electronics and medical systems....
Read more
Water-cooled test system OpenVPX
Elma Electronics introduces the Liquid Flow Through (LFT) VITA 48.4 modular test and development chassis, enabling rapid prototyping and testing for up to six 6U OpenVPX plug-in cards with...
Read more
Powerful 3V 3400F supercapacitor
The Vinatech VEC3R0348 QG is a supercapacitor (ultracapacitor) designed for applications where high power, fast cycles and long life are required. With an energy storage capacity of 4.25 Wh...
Read more
Skiving technology for compact and efficient cooling solutions
With the acquisition of Swedish Webra, Seifert Electronic has brought skiving technology in-house. This technology offers engineers new design freedom where conventional heatsinks fall short. The Flexfin Skiving heatsinks from Seifert...
Read more
Voltage and current measurement sensors for modern charging infrastructure
The growth of electric vehicles demands ever-increasing demands on the reliability, accuracy and safety of the charging infrastructure. Electrohms responds to this with a wide range of current and voltage sensors...
Read more
Space-saving indication and status lighting
The compact and space-saving design of Surface Area Light Guides (SALG) has been carefully developed to integrate seamlessly into enclosures with limited free space. With this, the functionality of...
Read more
Reflow-enabled SMD relay base saves time and space
Traditionally, industrial relays were not suitable for the reflow soldering process, requiring an additional manual assembly step. The new reflow-resistant relay base RA5-1W from PTR Hartmann eliminates that cumbersome...
Read more
Practical LFP batteries for AGVs
German SBS has supplemented its existing Unipower product line with two new lithium iron phosphate (LiFePO₄) based battery modules. Under the name CUBE, the manufacturer is introducing compact packs designed for...
Read more