News
Safe braking resistors for decentralized variable-frequency drives
Safe braking resistors play a crucial role in electric drive technology, particularly in situations involving high peak loads. This is even more important in decentralized drive technology, because the system components are located on and within the…
Read more
Parallel DC/DC Conversion for Redox Flow Batteries
The rapid growth of energy storage and DC microgrids calls for power electronics that are not only efficient, but also scalable and flexible. Epic Power’s EPC 18k 890i was developed for…
Read more
Less EMI, lower motor load, and longer motor cables
Variable-frequency drives generate high-frequency disturbances in the PWM output signal that cause EMI, motor load, and cable length limitations. Block’s SF4 all-pole sine wave filters convert this PWM signal into a virtually pure sine wave voltage…
Read more
Low-carbon mounting clamp combines durability with ease of installation
The choice of materials in building systems is playing an increasingly important role in reducing CO₂ emissions and improving the Environmental Performance of Buildings (MPG). With the DGBSC Low Carbon Series, …
Read more
Flexible AC Power Supply for Laboratory and Testing Environments
A precisely adjustable and reliable AC power supply is essential for the development and testing of electronic systems. The DST4000-3P from Deutronic is a programmable 3-phase AC power supply that has been specially developed…
Read more
Affordable control cabinet cooling without compromising on quality
Heat generation in control cabinets remains a major challenge in industrial automation. Effective and reliable airflow can significantly extend the service life of electronic components. Seifert Systems is the cooling specialist for industrial control cabinets and…
Read more
Compact SSR for power circuits up to 30 A
The trend toward more compact machines and control cabinets is placing ever-greater demands on available installation space. With the SF548340, Celduc offers a solid-state relay (SSR) that takes up only about 30%…
Read more
A Reliable 24 VDC Power Supply: The Key to Operational Reliability
In many industrial installations, the control system gets all the attention, while a stable power supply is just as important for reliable operation. The BLOCK PCC-0324-xxx-2 is a three-phase DIN-rail power supply that is…
Read more
0.6 mm ultra-thin and waterproof tact switch
The THU12U from PTR Hartmann is an extremely compact, IP67 waterproof tact switch designed for SMT mounting. It is designed to meet the requirements of modern portable electronics. With a…
Read more
3D embossing and digital printing for the best look and feel
Digital printing and 3D embossing open up new possibilities for the functional and visual finishing of electronics enclosures. With these techniques, Bopla offers a flexible solution for both prototypes and small- to medium-volume…
Read more
PCB transformers: safe, isolated, and versatile
Block offers a comprehensive portfolio of PCB transformers with double or reinforced galvanic isolation between the primary and secondary windings. All models are cUL and VDE certified and designed for use in SELV-…
Read more
Infrared power LED with adjustable beam angle for detection and illumination
The Sharlight SLE 35358CPC x3W aq is a 3W high-power infrared LED emitter with a peak wavelength of approximately 850 nm, designed for use in IR lighting and detection applications. The “x” in the…
Read more
Proven RFID performance, now ready for immediate integration
The RFID hardware from the AX’UP Air and AX’UP Dongle is now available as an OEM module. The AX’UP OEM is a compact, slim PCB with RAIN RFID, designed for integration into both…
Read more
250W VNX+ power backbone for mission-critical edge systems
The introduction of the VNX+ standard (VITA 90) creates a compact building block for high-performance edge computing. The architecture is designed for modular, robust systems and is compatible with SOSA,…
Read more
Sleek design, wide field of view: PIR sensor with a flat lens
Panasonic is launching the Flat Wide Detection Type, the first PIR motion sensor featuring a flat lens and the new PaPIRs+ technology. Designed for building automation, professional lighting control, and smart home applications, this sensor combines…
Read more
Rugged Quarter-Brick DC/DC converters
P-DUKE introduces the QBE75W and QBE100W series, a new generation of high-performance DC/DC converters designed for demanding electronics in industrial, military, and railway applications. Features: With a high efficiency of 92%, there is less power loss,…
Read more
Modular housing with integrated cooling solution
The BoVersa series from BOPLA is a modular enclosure system that combines functionality, thermal design, and industrial design in a single platform. The series has been developed for IoT, embedded, and wireless systems where...
Read more
Medical universal battery charger for professional applications
With the introduction of the Model 4041, Mascot is expanding its medically certified Blueline portfolio with a compact battery charger for professional use. The charger delivers a maximum power of 42 W and...
Read more
46% smaller footprint light pipe, without compromises
Modern PCB designs are becoming increasingly compact, but indicator lighting must remain visible. The SZSF Series from Bivar offers a flexible light-pipe system with a 46% smaller adapter footprint of 6x6mm and 30%...
Read more
Battery solutions for medical applications: safety and reliability
In medical equipment, the battery is a critical system component. Reliability, safety, and predictable behavior over the entire service life are essential, particularly in portable and life-critical applications. Battery solutions must therefore...
Read more
Clear marking for PCB and cable connectors
PTR Hartmann offers three marking techniques for PCB and cable connectors, even on round and angular surfaces. Using inkjet, pad printing, or laser, the marking is tailored to the application and environmental conditions. Coding...
Read more
Relays for 40A peak now also available in PiP reflow
Capacitive loads with high inrush currents are a challenge in modern automation. The new Panasonic ALQ6 power relay tackles this with an inrush current of 40A for 100μs. It is now also...
Read more
240 W open-frame power supply for medical applications
The P-Duke MAH240 is an open-frame AC/DC power supply with 240 W continuous power and a short-term peak power of up to 300 W @10 s, housed in a compact 5″ × 3″ enclosure. Due to its...
Read more
Compact development and testing platforms for VNX+
VNX+ (VITA 90) is the latest VITA standard for embedded high-performance computing in applications where Size, Weight, and Power (SWaP) are strictly limited. The architecture is a compact derivative of OpenVPX...
Read more
Targeted heat distribution at thermal hotspots using vapor chambers
In compact electronics and power electronics, thermal performance is often limited by local hotspots rather than total dissipation capacity. Where an aluminum heat sink alone falls short, ThermSpread from Seifert Electronic offers...
Read more
New industrial RFID readers higher read performance and great security
iDTRONIC has used the knowledge from the outgoing BlueBox series to develop a new line of industrial UHF RFID readers. As before, the RFLINE series consists of several readers,...
Read more
Solid state relays with built-in diagnostics
Celduc's SOD Series solid state relays offer an important step toward smarter industrial automation by combining switching with advanced diagnostics which prevents unplanned downtime and maximizes process efficiency. These single-phase...
Read more
Intelligent battery chargers for production and workshop
In modern manufacturing processes and workshops, stable power sources and reproducible charging strategies are increasingly important. Vehicles and industrial systems use a variety of battery technologies, while diagnostics, software updates and quality control often require constant...
Read more
DIN rail connectors mount faster without ferrules
Degson has a full product line of 5mm wide DIN rail connectors with Push-Snap connections where it is sufficient to insert a stripped wire, solid or flexible, into the connector after which it...
Read more
F-Gas-proof industrial air conditioners
Seifert Systems is one of the first manufacturers to introduce an industrial air conditioner that is fully compliant with the upcoming F-Gas regulations as well as PFAS-free: the SLIMLINE NEO.Whereas many manufacturers only use their refrigerants for...
Read more