News

Clear filters
Vertical light pipes with integrated press-fit mounting

Vertical light pipes with integrated press-fit mounting

Bivar's GVLP series consists of vertical LED light pipes for compact electronic systems where the distance between the PCB and the front panel is limited. The light pipes use an integrated press-fit mounting,…

Read more
The Technology Behind a Custom Enclosure for the Healthcare Industry

The Technology Behind a Custom Enclosure for the Healthcare Industry

The CareHub is a smart care call and monitoring system developed by CLB that combines proprietary hardware and software. CLB is partnering with Metric Injection Molding to manufacture the plastic housing…

Read more
QMC Chassis Manager for VITA 93 Systems

QMC Chassis Manager for VITA 93 Systems

QMC (VITA 93) defines a standardized mezzanine architecture for compact, modular embedded systems. Elma’s QMC Chassis Manager provides a generic management layer for a wide range of QMC-based platforms. The solution supports VITA…

Read more
3D embossing and digital printing for the best look and feel

3D embossing and digital printing for the best look and feel

Digital printing and 3D embossing open up new possibilities for the functional and visual finishing of electronics enclosures. With these techniques, Bopla offers a flexible solution for both prototypes and small- to medium-volume…

Read more
250W VNX+ power backbone for mission-critical edge systems

250W VNX+ power backbone for mission-critical edge systems

The introduction of the VNX+ standard (VITA 90) creates a compact building block for high-performance edge computing. The architecture is designed for modular, robust systems and is compatible with SOSA,…

Read more
Modular housing with integrated cooling solution

Modular housing with integrated cooling solution

The BoVersa series from BOPLA is a modular enclosure system that combines functionality, thermal design, and industrial design in a single platform. The series has been developed for IoT, embedded, and wireless systems where...

Read more
46% smaller footprint light pipe, without compromises

46% smaller footprint light pipe, without compromises

Modern PCB designs are becoming increasingly compact, but indicator lighting must remain visible. The SZSF Series from Bivar offers a flexible light-pipe system with a 46% smaller adapter footprint of 6x6mm and 30%...

Read more
Compact development and testing platforms for VNX+

Compact development and testing platforms for VNX+

VNX+ (VITA 90) is the latest VITA standard for embedded high-performance computing in applications where Size, Weight, and Power (SWaP) are strictly limited. The architecture is a compact derivative of OpenVPX...

Read more
Water-cooled test system OpenVPX

Water-cooled test system OpenVPX

Elma Electronics introduces the Liquid Flow Through (LFT) VITA 48.4 modular test and development chassis, enabling rapid prototyping and testing for up to six 6U OpenVPX plug-in cards with...

Read more
Space-saving indication and status lighting

Space-saving indication and status lighting

The compact and space-saving design of Surface Area Light Guides (SALG) has been carefully developed to integrate seamlessly into enclosures with limited free space. With this, the functionality of...

Read more
Complete assembly electronics housing

Complete assembly electronics housing

Metric-IMS combines engineering design with in-house manufacturing capacity to create high-quality plastic enclosures and components. Whereas many manufacturers focus exclusively on high-volume or injection molding only, Metric offers an end-to-end...

Read more
AI at the Edge: computing power under extreme conditions

AI at the Edge: computing power under extreme conditions

Elma presents the JetSys-2010: a powerful Edge-AI system that enables High-Performance Computing in the most demanding environments. The system is specifically designed for industrial automation and mobility solutions where reliability, robustness...

Read more
Innovative waterproof seal by overmolding

Innovative waterproof seal by overmolding

Metric IMS, Elincom's sister company, has developed a revolutionary technique to waterproof electronics even at low quantities quickly, cost-effectively and sustainably by overmolding with plastic....

Read more
Modular slim DIN rail enclosures

Modular slim DIN rail enclosures

When developing applications for DIN-rail mounting, standard DIN-rail enclosures are often used. However, these are in many cases unnecessarily wide because use is made of a separate...

Read more
Lightpipes give light to your application

Lightpipes give light to your application

Bivar lightpipes are plastic components for transporting light signals from one point to another. With the use of these light guides, electronics designs remain compact and simple, but lightpipes...

Read more
Customer-specific waterproof enclosures

Customer-specific waterproof enclosures

The choice of a customer-specific injection molded housing is often dictated by product costs. But branding and functionality can also be decisive. Metric-IMS also develops and produces waterproof electronics enclosures up to even IP69K....

Read more
Special design enclosures

Special design enclosures

The choice of a customer-specific injection molded housing is often dictated by product cost, but branding and functionality can also be decisive. Sometimes this all comes together in exceptional art projects. Metric-IMS develops...

Read more
New outdoor IP68 housing

New outdoor IP68 housing

An enclosure with IP68 rating means no water penetration after 24 hours under 1 meter of water. Not many standard enclosures are available for this purpose. Takachi has come up with...

Read more
New VPX 3U 12 slot SOSA backplane

New VPX 3U 12 slot SOSA backplane

Elma Electronic has released a new 3U 12-slot backplane that conforms to The Open Group Sensor Open Systems Architecture (SOSA) Technical Standard 1.0. The backplane supports the latest open standard requirements of...

Read more
Injection molded enclosures in small quantities

Injection molded enclosures in small quantities

In addition to standard enclosures, Elincom can offer customer-specific enclosures through our sister company Metric IMS. By cleverly designing the enclosure, the cost of the injection mold remains low. As a result, it pays al...

Read more
Shock-proof COM-Express system

Shock-proof COM-Express system

Elma's new platform FlexCom Small is intended to be the basis for a machine control system for heavy civil machinery in demanding environments. The system is based to COM-Express and is IP67. In addition,...

Read more
Test systems for board experts

Test systems for board experts

To develop a new product from concept to finished product, functional development and testing tools are indispensable. Elma, as experts in system platforms, offers a diverse selection in development systems:...

Read more
New high speed SOSA backplanes

New high speed SOSA backplanes

As the Open Group Sensor Open Standards Architecture, or SOSA initiative, continues to be completed, Elma has added two 3U backplanes to its growing product family aligned with Snapshot 3...

Read more
Waterproof keychain enclosures

Waterproof keychain enclosures

The IP67 hermetically sealed keyfob enclosure WC from Takachi has been expanded to include a larger variant measuring 50.5×28.2x105mm.Like the other versions, the WC105 features an ABS body...

Read more
Conductive plastic for enclosures

Conductive plastic for enclosures

Premier PBT-250-FR is the latest electrically conductive base material for manufacturing injection molded enclosures. The result is a (PBT) plastic EMC shielded enclosure with a UL94 5VA rating making this the...

Read more
Modular cPCI serial platform

Modular cPCI serial platform

Elma's ELOS rugged embedded systems are designed specifically for industrial̈le automation applications. They offer advanced EMC shielding and a variety of options. The favorably priced concept is based on modular...

Read more
Develop system platform cPCI Serial

Develop system platform cPCI Serial

Elma offers a compact and handy development platform for cPCI Serial with the system platform 047-425. The 4U system is 42HP and 1⁄2 19 inches wide, has one CPU slot and four...

Read more
DIN rail terminal housing: faster mounting

DIN rail terminal housing: faster mounting

As an extension to PTR's Integrated Connection System, a version has been created in which the connections in the housing are implemented with a solder p and. As a result, it suffices to connect only the PCB...

Read more
Alu-Topline with black end caps

Alu-Topline with black end caps

For the different variants of the Alu-Topline profile enclosures, the end caps are now also available in black (RAL9005). The anodized aluminum profile in combination with the black end caps forms a high-quality...

Read more
Unimas; Universal housing with timeless design

Unimas; Universal housing with timeless design

With 4 sizes, Bopla offers an economical solution for small and medium-sized control and monitoring devices. The enclosures in the Unimas series consist of 2 shell parts and 2 plastic front panels. The...

Read more